+1(316)4441378

+44-141-628-6690

Archive for the ‘Engineering’ Category

Product Function

The paper is a part of an essay but it is not a full essay.
This paper should describe the product function of the smart tent such as the features, specifications, how is work...
This paper should include at least the following specifications as the main paragraphs:
1. Energy and Power
    Solar panels
        Lights
    Battery Pack + Charging hub ( Sockets and Switches)
    Motion Sensors
2. Heating
3. Fabric
      Waterproof
      Fireproof,
      UV and
      Lightweight
4. Anti-insects
5. Installation
      Easy to set up
      Packaging
This paper should not include the brand name of the features such as solar panel, battery etc.
The product function should describe technical specifications
Some of the Specifications are attached.

Rainforest Concrete Frame

Order Description
Interim Assessment. Document of Case Based Precedence about Reinforced concrete Frame. 5 Case Study should be relevant to the project which is construction of six storey, two floors of RC Frame car park and the other floors is steel frame. my part focus in the 2 floors of RC frame car park, develop a study, analysis and review on why I choose a typical mixture of RC that have been used in the case study and it has been successful, buildings that used slabs concrete in their car park structure. Analysis the slabs (dimension, width, depth, thickness,..) same goes to the columns, beams..., trying to make the spice less column to fit more cars as possible. 1-must be in-situ reinforced concrete and the management of shell and core. 2- including calculations 3- mention the health and safety. 4- most important thing for the client is the time then cost the quality inclding some picture(need the source beside it), should mention the time o

Rainforest Concrete Frame

Interim Assessment. Document of Case Based Precedence about Reinforced concrete Frame. 5 Case Study should be relevant to the project which is construction of six storey, two floors of RC Frame car park and the other floors is steel frame. my part focus in the 2 floors of RC frame car park, develop a study, analysis and review on why I choose a typical mixture of RC that have been used in the case study and it has been successful, buildings that used slabs concrete in their car park structure. Analysis the slabs (dimension, width, depth, thickness,..) same goes to the columns, beams..., trying to make the spice less column to fit more cars as possible. 1-must be in-situ reinforced concrete and the management of shell and core. 2- including calculations 3- mention the health and safety. 4- most important thing for the client is the time then cost the quality inclding some picture(need the source beside it), should mention the time of every process, like how long they toke to finish cons

Rainforest Concrete Frame

Interim Assessment. Document of Case Based Precedence about Reinforced concrete Frame. 5 Case Study should be relevant to the project which is construction of six storey, two floors of RC Frame car park and the other floors is steel frame. my part focus in the 2 floors of RC frame car park, develop a study, analysis and review on why I choose a typical mixture of RC that have been used in the case study and it has been successful, buildings that used slabs concrete in their car park structure. Analysis the slabs (dimension, width, depth, thickness,..) same goes to the columns, beams..., trying to make the spice less column to fit more cars as possible. 1-must be in-situ reinforced concrete and the management of shell and core. 2- including calculations 3- mention the health and safety. 4- most important thing for the client is the time then cost the quality inclding some picture(need the source beside it), should mention the time of every process, like how long they toke to finish cons

This assignment require to use a software called ABAQUS QUESTION 1: Design a Cantilever Bar using the Bar Element Method and Shell Element Method. The Shell Element Method I already did it. For the Bar Element Method, a design to the cantilever bar is required to produce results using Euler Bernoulli Beams and Timoshenko Method. Note: More information about the requirement are supported in the assignment. at the 3rd page, do not answer the questions. I have to answer them by myself. QUESTION 2: Design a wing using ABAQUS as shown in the assignment, apply the pressure and run stress conversion. Note: More information about the requirement are supported in the assignment. NOTATION: I only have a problem on how to the design the cantilever and finding the correct way of applying EuIer Bernoulli B33 and Tioshemko B32 Beam in the stress study in Q1 NOTATION: I only have a problem on how to the design the wing

This assignment require to use a software called ABAQUS QUESTION 1: Design a Cantilever Bar using the Bar Element Method and Shell Element Method. The Shell Element Method I already did it. For the Bar Element Method, a design to the cantilever bar is required to produce results using Euler Bernoulli Beams and Timoshenko Method. Note: More information about the requirement are supported in the assignment. at the 3rd page, do not answer the questions. I have to answer them by myself. QUESTION 2: Design a wing using ABAQUS as shown in the assignment, apply the pressure and run stress conversion. Note: More information about the requirement are supported in the assignment. NOTATION: I only have a problem on how to the design the cantilever and finding the correct way of applying EuIer Bernoulli B33 and Tioshemko B32 Beam in the stress study in Q1 NOTATION: I only have a problem on how to the design the wing

Mechanical Engineering

This assignment require to use a software called ABAQUS QUESTION 1: Design a Cantilever Bar using the Bar Element Method and Shell Element Method. The Shell Element Method I already did it. For the Bar Element Method, a design to the cantilever bar is required to produce results using Euler Bernoulli Beams and Timoshenko Method. Note: More information about the requirement are supported in the assignment. at the 3rd page, do not answer the questions. I have to answer them by myself. QUESTION 2: Design a wing using ABAQUS as shown in the assignment, apply the pressure and run stress conversion. Note: More information about the requirement are supported in the assignment. NOTATION: I only have a problem on how to the design the cantilever and finding the correct way of applying EuIer Bernoulli B33 and Tioshemko B32 Beam in the stress study in Q1 NOTATION: I only have a problem on how to the design the wing

Mechanical Engineering

This assignment require to use a software called ABAQUS QUESTION 1: Design a Cantilever Bar using the Bar Element Method and Shell Element Method. The Shell Element Method I already did it. For the Bar Element Method, a design to the cantilever bar is required to produce results using Euler Bernoulli Beams and Timoshenko Method. Note: More information about the requirement are supported in the assignment. at the 3rd page, do not answer the questions. I have to answer them by myself. QUESTION 2: Design a wing using ABAQUS as shown in the assignment, apply the pressure and run stress conversion. Note: More information about the requirement are supported in the assignment. NOTATION: I only have a problem on how to the design the cantilever and finding the correct way of applying EuIer Bernoulli B33 and Tioshemko B32 Beam in the stress study in Q1 NOTATION: I only have a problem on how to the design the wing

investing in a private residence

ROJECT AND REPORT Select one of the two following topics: 1. Investing in mutual funds: Select one mutual fund from each of three different firms. Acquire information about the funds, their policies, their costs, etc. Track and graph the value(s) of the funds for 6 months, i.e. from 02/01/2016 through 07/28/2016. Determine your before-tax rate of return on each of the funds (including your costs of investment). Assess the relative performance of each of the funds. 2. Investing in a private residence: Select a private residence currently on the market. Acquire information, estimate costs, and generate a cash flow associated with investing in the residence. Based on your results, determine the after-tax income that you will need in order to afford the residence. Note that being qualified for a mortgage does not necessarily mean that one can actually "afford" the residence. Note: There are a number of sites on the internet from which information and guidance can be acquired regarding bot

Global Supply Chain Management

My master thesis topic is Global Supply chain management and I don't have any information about the topic but wanted it to be perfect with Questionnaires and other details I have a separate formate given by the professor and I also have to defend my topic on which basis I have done my research what is the out come I have showed by my master thesis .

Hybrid filter–wrapper feature selection for short-term load forecasting

1. I don't need introduction for the research 2. I need the proposed hybrid filter–wrapper approach 3. I need mathematical solutions with all equations and explanations 4. I need simulation results with six graphs in full sizes including explanations to those graphs proving the results 5. Table of analysis of results for about six different methods in forecasting hourly loads 6. Table with the mean squared percentage error 7.All references and citations